Quooker spare parts

On our site you can find all available spare parts for this type of faucet. This allows you to overhaul or repair your Quooker system yourself in most cases.

The Quooker cisterns come in 4 models. These include two mechanical models without an electronic check valve; these are the Pro3 and the Combi models. These are for the singletaps Quooker faucet (small boiling water faucet which has a pull-out neck and stands next to a regular faucet). There are also two electronic models, these have an electronic check valve. These are the PRO3 EQ and the Combi EQ: these are used with the Nordic and the Fusion version. These are the faucets which have the ribbed knob around the spout. If you are looking for Quooker parts, you can click on the type of faucet below and find the right Quooker parts.

Repair your Quooker faucet with the right parts
When you are going to repair your Quooker faucet, the Quooker faucet parts from Replacement Market will come in handy. When overhauling the Quooker, make sure to unplug the faucet, then turn on the faucet until only cold water comes out, and then remove the water pressure.

If little water is coming out of your Quooker system, this could have 2 causes and we recommend the following Quooker parts:

- The Quooker reservoir is full of scale. We advise to install a new HITAC filter.

- The hoses of the Quooker thermo-element are calcified. You will need a new thermocouple (a HITAC filter is included in this).

- If you have a Quooker tank and a tap, but you are missing the Quooker connection set, you can click on the parts drawing of the tank and look up the right Quooker connection material. A Quooker connection set can be an inlet combination, but also the black plastic hose that goes from the drain to the inlet combination (pressure relief valve). For the Combi Quooker you need some additional connection materials such as a mixing valve and sometimes a Quooker conversion kit.

In the above cases, you can find the right Quooker faucet parts on our webshop.

Quooker recommends replacing certain parts with some time. The HITAC filter for example; it should be replaced every 5 years. This ensures that there are no foreign tastes in the water, thus guaranteeing the quality from your faucet. If your Combi or Combi+ Quooker has no or too much hot water (not boiling water), you need a new mixing valve. The mixing valve can be disrupted by limescale build-up, preventing the water from mixing correctly. You will also find these Quooker parts in our shop.

Fault
If your Quooker blinks twice it means that your tap is broken; you will need a new tap.


If your Quooker blinks 4x, you can see if you can reset the faucet. You need to unplug the faucet and then pull the connector from the reservoir cover. Then you should wait for at least 10 seconds. Then you put the plug of the tap back into the cap of the reservoir and the plug of the Quooker into the reservoir. The Quooker is reset and will probably work again. Otherwise, a new interior mechanism needs to be installed in the Quooker reservoir. Instead of unplugging and plugging it in, you can also turn the faucet's group on and off.

Buying the right Quooker parts at Replacement Market?
Are you unsure about what type of faucet you have or which Quooker faucet part you need? Feel free to contact us. You can easily do so via our chat, WhatsApp, phone or email. We will be happy to help you purchase the right Quooker parts.